-- Up counter with enable and reset
--
-- Note how en must be handled after the flip-flop generating
-- code.
--
-- Also note that the when statement didn't appear to work!

library ieee;
use ieee.std_logic_1164.all;
use ieee.std_logic_unsigned.all;

entity counter is
  
  port (
    clk, reset_n, en : in  std_logic;
    q                : out std_logic_vector (31 downto 0);
    co               : out std_logic);

end counter;

architecture behavioral of counter is

  signal count : std_logic_vector (31 downto 0);
  
begin  -- behavioral

  q <= count;

  state: process (clk, reset_n)
  begin  -- process state
    if reset_n = '0' then
      count <= X"00000000";
    elsif clk'event and clk = '1' then
      if en = '1' then
        count <= count + X"00000001";
      end if;
    end if;
  end process state;

  carry_out: process (count, en)
  begin  -- process carry_out
    if count = X"FFFFFFFF" and en = '1' then
      co <= '1';
    else
      co <= '0';
    end if;
  end process carry_out;
  
end behavioral;